设为首页 加入收藏
>> 生态护坡模具
>> 箱式护坡模具
>> 拱形骨架模具
>> 框格护坡模具
>> 锁块护坡模具
地址: 保定市东三环工业园区
电话: 0312-8103818 18803129528
传真: 0312-8103818
邮箱: 107108222@qq.com
联系人: 边经理
QQ: 107108222
您现在的位置:首页->公司新闻->锚杆框架梁模具的基本介绍

锚杆框架梁模具的基本介绍

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

锚杆框架梁模具也是一种大型的护坡模具,该模具的使用能满足各种大型的护坡工程的需要,之前传统的护坡模式已经满足不了公路、铁路两侧的护坡安全的需要了,这是一种跟拱形护坡模具相类似的产品,该模板是通过焊接而成的,并且在钢材的选择上十分的挑剔,不同规模的框架梁选择的筋板和面板的厚度是不一样的,一般面板的厚度大多选择3毫米的,而筋板要配合着面板的厚度来进行选择,一般筋板的厚度要比面板的厚度高出2毫米,才能达到面板和筋板相互支撑的效果,并且描杆框架梁模具的生产成本基本上是由钢板的厚度所决定的,钢板越厚成本越高。描杆框架梁模具的使用方式和拱形骨架的使用方式是相似的,都是将模具铺设到坡道上后再进行灌浆,也就是说这两种模具都是采取的现浇生产的方式,将描杆框架梁制作好了之后要将土填进其空心部分后种上绿植,这样不仅能美化坡道,还进一步增强了护坡效果,所以近些年该模具的需求量也在逐渐增加。

The anchor bolt frame beam mold is also a large slope protection mold. The use of the mold can meet the needs of various large slope protection projects. The previous traditional slope protection mode can not meet the needs of slope protection safety on both sides of highway and railway. This is a product similar to the arch slope protection mold. The template is made by welding, Moreover, they are very picky in the selection of steel. The thickness of stiffened plates and panels selected for frame beams of different sizes is different. Generally, the thickness of panels is mostly 3mm, and the stiffened plates should be selected according to the thickness of panels. Generally, the thickness of stiffened plates should be 2mm higher than the thickness of panels, so as to achieve the effect of mutual support between panels and stiffened plates, And the production cost of the tracing bar frame beam die is basically determined by the thickness of the steel plate. The thicker the steel plate, the higher the cost. The use mode of the mold for the tracing rod frame beam is similar to that of the arch skeleton. Both molds are grouted after being laid on the ramp, that is, both molds are cast-in-situ. After the tracing rod frame beam is made, the soil should be filled into its hollow part and planted with green plants, which can not only beautify the ramp, but also further enhance the effect of slope protection, Therefore, in recent years, the demand for the mold is also gradually increasing.

锚杆框架梁模具模板是一种采用钢板焊接而成的大型模具,锚杆框架梁模具模板属于护坡模具中的一种,是同拱形骨架模具相类似的模板,一般采用棱形框格护坡的方式,每个锚杆框架梁都有固定的规格,一般呈现为正方体的样式。这种模具是目前新型护坡中的一种,全部采用现场浇筑的生产方式,筋板与面板的厚度选择是依据对该模具使用次数以及生产成本的考虑而设定的,往往采用3毫米面板,5毫米的筋板进行面板的定制工作。锚杆框架梁模具模板的使用有效的满足了对大型现浇护坡工程的需要,尤其是呈现出的棱形样式,更加凸显了美观、大方以及实用性的特点。因为土培起来的护坡面积大,使用六棱块或者其他常规的护坡砖不仅仅工程两大,而且传统的护坡工程已经无法满足现在高铁、高速公路的护坡安全需要,所以进行了进一步的创新,出现了锚杆框架梁样式的护坡模板。

The anchor frame beam mold template is a large mold welded with steel plates. The anchor frame beam mold template belongs to one of the slope protection molds. It is a template similar to the arch frame mold. Generally, the prism frame slope protection is adopted. Each anchor frame beam has a fixed specification and generally presents the style of cube. This kind of mold is one of the new slope protection at present. All of them adopt the production mode of on-site pouring. The thickness selection of rib plate and panel is set based on the consideration of the use times and production cost of the mold. 3mm panel and 5mm rib plate are often used for panel customization. The use of anchor frame beam formwork effectively meets the needs of large-scale cast-in-situ slope protection projects, especially the prismatic style, which highlights the characteristics of beauty, generosity and practicability. Because the slope protection area cultivated by soil is large, the use of hexagonal blocks or other conventional slope protection bricks is not only two projects, but also the traditional slope protection project can not meet the slope protection safety needs of high-speed railway and expressway. Therefore, further innovation has been carried out, and the slope protection template of anchor frame beam style has emerged.


【上一个】 中系梁模板-现浇钢模板-连系梁模板定制 【下一个】 防浪石模具-防浪块模具-防浪墙模具定制


 · 锚杆框架梁模具的基本介绍

|流水槽钢模具|防撞墙模具|